The Cube ID CAN is a remote ID for drones and UAS'. The module broadcasts information; type of aircraft, identification number, position, altitude etc.
HERE FLOW drone optical flow sensor and LIDAR module. Is an advanced and ultra small module specialy designed for Ardupilot/PX4. Uses CAN protocol to communicate with your flight controller. For more information: https://docs.cubepilot.org/user-guides/flow-senor/here-flow
Mauch 50A ampere and voltage meter. Instantly usable with the Mauch PL and PC series BEC and X2 sensor hub. The cable is included in the BEC. Usable up until 20S / 85V. Molex connector 4p. Have a look at the support page for more information about how to use the product.
100A – Current / Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-100U. Voltage range is up to 20S (85V) with solder bridge open and up to 7S (30V) with solder bridge closed. This Sensor board connects directly to any Premium-Line BEC or Sensor Hub X2-V2.
200A - Current / Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-200U. Voltage range is up to 20S (85V) with solder bridge open and up to 7S (30V) with solder bridge closed. This Sensor board connects directly to any Premium-Line BEC or Sensor Hub X2-V2.
Mauch 200A ampere and voltage meter with 8AWG cable. Instantly usable with the Mauch PL and PC series BEC and X2 sensor hub. The sensor cable is included with the BEC. Usable up until 20S / 85V. Molex connector 4p.
The Mauch PL 2-6S BEC 1x 5.3V has a power input of 2-6S LiPo / max. 28V. Output 5.35V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A output current. Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2 and output conector with Molex Clik-Mate 4p. Input wrong polarity…
Mauch premium line BEC 2x 5.35v output. The BEC is delivered without flight controller cable! Please choose one of the following cables: M041: DF13-6p -> Pixhawk 1 / APM… etc. M042: Molex Clik-Mate 2.0 – 6p -> Pixhawk 2.1 M043: JST-GH-6p -> Pixhawk 3… etc
Mauch premium line BEC 2x 5.35v and 1x 12v output. The BEC is delivered without flight controller cable! Please choose one of the following cables: M041: DF13-6p -> Pixhawk 1 / APM… etc. M042: Molex Clik-Mate 2.0 – 6p -> Pixhawk 2.1 M043: JST-GH-6p -> Pixhawk 3… etc
1. Mauch premium line HYB BEC 1x 5.35v output The BEC is delivered without a flight controller cable! Please choose one of the following cables: M041: DF13-6p -> Pixhawk 1 / APM… etc. M042: Molex Clik-Mate 2.0 – 6p -> Pixhawk 2.1 M043: JST-GH-6p -> Pixhawk 3… etc
Mauch premium line HYB BEC 2x 5.35v, 1x 5v en 1x 12v output. the UBEC is delivered without a flight controller cable. chose one of the following: M041: DF13-6p -> Pixhawk 1 / APM… etc. M042: Molex Clik-Mate 2.0 – 6p -> Pixhawk 2.1 M043: JST-GH-6p -> Pixhawk 3… etc
Mauch 2x 200A PDB with 400A main switch power distribution board for Pixhawk 2.1 (The Cube) and any other flight controller via adapter cable. With integrated 2x200A hall sensor, Sensor Hub X2, 4-14S HYB-BEC and most important an main power switch with an continues current of 400A.
Mauch Power Cube 1, 3th generation. 1x 5.35v output 10A . Improve your drone with an advanced UBEC. Specially designed for the Cube autopilot but also compatible with other flight controllers. Provides the drone or UAV with a safe power supply.
Mauch Power Cube 2, 3th generation. 2x 5.35v output 10A Improve your drone with an advanced UBEC. Specially designed fot the Cube autopilot but also compattible with other flight controllers. Provides the drone or UAV flight controller with a safe power supply.
Mauch Power Cube 3, 3th generation. 2x 5.35v output 10A + 1x 12v 10A. Improve your drone with an advanced UBEC. Specially designed for the Cube autopilot but also compatible with other flight controllers. Provides the drone, UAV or peripherals with a safe power supply.
Mauch Power Cube 4, 3th generation. 3x 5.35v output 10A + 1x 12v 10A. Improve your drone with an advanced UBEC. Specially designed for the Cube autopilot but also compatible with other flight controllers. Provides the drone, UAV or peripherals with a safe power supply.
The Cube orange standard set (pixhawk 2.1) is an all in one autopilot and flightcontroller for your drone. The Cube is one of the newest and most advanced flightcontrollers programmable with Ardupilot or PX4. It is capabale of fully autonomous flight. With its triple redundant IMU sensors it can be used for professional drones, UAV's, rovers or even subs. …
The Herelink HD video transmission system is an all in one ground control station, data telemetry and remote controller. Up to 12 km range and 1080HD video. Designed for Ardupilot, PX4 and the Cube autopilots. also compatible with other flight controllers.
The Spektreworks Kore carrier board is a great way to upgrade your Cube autopilot. It comes with pre installed PDB capable of 140A continous current. A current and voltage sensor. Internal BEC for payload (5v and 12v). All the connections are placed conveneintly for your multirotor.
The Cube orange is the newest generation autopilots designed for Ardupilot or PX4. The Cube has triple redundant sensors, allowing it to control the most demanding drones and UAV's.
The Airbot Systems Mini carrier board is one of the way to install a Cube on a drone. The Mini carrier board encapsulate all the wiring in a 50.5x57.5mm board, in order to save space and weight for applications which have size limits.
The here 3 RTK GNSS/GPS set is a combo set. It has the Here 3 and Here+ RTK base included. Highlights Centimeter‑level GNSS positioning for the mass market Integrated Real Time Kinematics (RTK) for fast time‑to‑market Smallest, lightest, and energy‑efficient RTK module Complete and versatile solution due to base and rover variants
The Airbot Systems Mini carrier board is one of the way to install a Cube on a drone. The Mini carrier board encapsulate all the wiring in a 50.5x57.5mm board, in order to save space and weight for applications which have size limits.
The Airbot Systems Mini carrier board is one of the way to install a Cube on a drone. The Mini carrier board encapsulate all the wiring in a 50.5x57.5mm board, in order to save space and weight for applications which have size limits.
The Here 3+ GPS is a high precision GNSS system that supports RTK mode, built with CAN protocol. It is also designed to be dust-proof and splash-proof up to a certain limit.
De HERE+ v2 RTK GNSS combo is capable of centimeter level precision. It is the perfect solution for mapping and survey drones. Or other drones that require a precise navigation performance. 2 seperate products: HX4-06058 Here+ V2 Rover (M8P) HX4-06019 Here+ RTK Base (M8P) What is inside: Here+V2 RTK Rover * 1 Here+V2 RTK Rover Connecting Cable(Serial+I2C) * 1 Here+V2 RTK Rover Connecting Cable(CAN) * 1 UART-USB Converter…
The Herelink air unit HD video transmission system is an all in one ground control station, data telemetry and remote controller. Up to 12 km range and 1080HD video. Designed for Ardupilot, PX4 and the Cube autopilots. also compatible with other flight controllers.
The Herelink HD video transmission system is an all in one ground control station, data telemetry and remote controller. Up to 12 km range and 1080HD video. Designed for Ardupilot, PX4 and the Cube autopilots. also compatible with other flight controllers.
The Hexsoon EDU450 is a drone frame specially designed for the Cube autopilot but also compatible with other flightcontrollers. The drone frame is perfect for development, testing or just hobby usage. The set is complete with all the hardware needed to complete the frame; wires, power distribution etc.
PL and PC series sensor cable. Compatible with the PL series BEC and PL-xxx sensors or the X2 sensor hub. This cable is included in the BEC or X2 sensor hub.
Power Brick Mini module for The Cube (Pixhawk 2.1) This power brick mini is the standard power module for the Pixhawk 2.1 the cube. It suplies the cube with a steady power source. The power brick also provides current and voltage readings to the autopilot system. Select with or without XT 60 plugs.
2 x RFD868x Radio Modems 1 x Antenna, 868-900MHz Quarter wave monopole 2.1dBi 1 x Antenna, 868-900MHz Right Angle Quarter wave monopole 2.1dBi 4 x Antennas, 868-900MHz Half wave dipole 3dBi 1 x FTDI USB cable
The Cube purple autopilot is the smallest cube flightcontroller yet. Instead of a triple redundant sensor it has a single IMU and baro sensor. It is perfect for the less demanding drone builds.
The CUBE purple set is a basic model autopilot and flightcontroller for smaller drones, rovers and airplanes. Despite its size, this drone controller has got almost the same abilities as his bigger brother The CUBE orange.
The ADS-B carrier board is an updated version of the original carrier board. With the build i nADS-B receiver you are able to see and avoid other aircraft.
Amass XT150 connectors (1 pair). 6mm gold plated bullet connectors. 150A constant current. Easy to solder to Batteries and PDB’s. We recommend using silicon wires. Perfect for the larger and more demanding drone builds.
Amass XT60 H connectors (1 pair). 3,5mm gold plated bullet connectors. 60A constant current. Easy to solder to Batteries and PDB’s. We recommend using silicone wires. Perfect for the larger and more demanding drone builds. We can advise in your connector choice.
AMASS XT90-S anti spark connector is the same connectors as the regular XT90. But these connectors come with anti spark protection. Give your drone added protection with this set. contact us for advise on your connector selection.