Description

The Herelink air unit HD video transmission system is an all in one ground control station, data telemetry and remote controller. Up to 12 km range and 1080HD video. Designed for Ardupilot, PX4 and the Cube autopilots. also compatible with other flight controllers.

What’s inside:

for more info, go to our support page: https://aeroboticshop.com/support/

or: https://docs.cubepilot.org/user-guides/herelink/herelink-user-guides

Features

• Integrated digital transmission system simultaneously transmitting video, telemetry and control.

• 1080P HD video with dual digital video inputs.

• Dual S.bus signal output for simultaneous control of autopilot and pan/tilt cameras.

• RC gimbal control on dedicated service independent from Solex TX / QGC.

• Tether and share video and telemetry via wifi ground station such as Mission Planner.

• Onboard Arm Cortex A53 & Cortex A53 SOC in both air and ground units for custom applications.

Technical specifications ground control station

Ground & Air Unit:

Air Unit:

Weight(antenna included)

Herelink 1.1: 98g

Size

78.5×30×15mm

Signal Bandwidth

20MHz / 10MHz

Power Consumption

The average power consumption does not exceed 4W

Micro HDMI 1

Camera video signal input (Recommend)

Micro HDMI 2

Camera video signal input

Power Input

Recommended supply voltage ~7V: minimum 6V, maximum 12V and avoid sharing BEC with servos

UART Interface

3.3V UART

S.bus Interface

Dual RCout ，S.bus1 and S.bus2

Micro USB

Used for debugging and upgrading, support OTG mode**（no need external power for USB device）**

Buttom

Used for pairing and state reset

Indicator light 1 ，2

Used to indicate state for pairing and video transmission

MMCX antenna jack 1，2

Used for signal transmission and ground communication

SD Slot（only supported by Airunit 1.1）

For future usage

ETH Interface（only supported by Airunit 1.1）

Network protocol device access