Herelink HD Video Transmission System v1.1

1.089,00

The Herelink HD video transmission system is an all in one ground control station, data telemetry and remote controller. Up to 12 km range and 1080HD video. Designed for Ardupilot, PX4 and the Cube autopilots. also compatible with other flight controllers.

Available on backorder

Description

The Herelink ground control station HD video transmission system is an all in one ground control station, data telemetry and remote controller. Up to 12 km range and 1080HD video. Designed for Ardupilot, PX4 and the Cube autopilots. also compatible with other flight controllers.

What’s inside:

HX4-06122 Herelink Controller Set v1.1
1 x Herelink Controller Unit (HX4-06212
2 x Herelink Controller Joystick
1 x Herelink Omni-directional Antenna
1 x Herelink Directional Antenna
HX4-06210 Herelink Air Unit Set v1.1
1 x Herelink Air Unit
1 x Herelink Mounting Plate
1 x Herelink Screw Set
1 x Herelink Silicone Ring Set
2 x Herelink Taoglas Antenna
1 x Herelink Fan
1 x Herelink Cable Set
1 x Herelink HDMI Cable
1 x Herelink Set up tips cardThis product is two separate packagings.

for more info, go to our support page: https://aeroboticshop.com/support/

or: https://docs.cubepilot.org/user-guides/herelink/herelink-user-guides

Features

  • Android based smart device with 5.46 inch 1080P capacitive touch screen.

  • Integrated digital transmission system simultaneously transmitting video, telemetry and control.

  • Custom Solex TX and QGC ground station software with MAVlink support for Ardupilot and PX4.

  • Dual hall effect self centering gimbals with removable sticks.

  • 1080P HD video with dual digital video inputs.

  • Dual S.bus signal output for simultaneous control of autopilot and pan/tilt cameras.

  • 6 customisable Mavlink buttons and Mavlink/Sbus hardware wheel.

  • RC gimbal control on dedicated service independent from Solex TX / QGC.

  • Tether and share video and telemetry via wifi ground station such as Mission Planner.

  • Onboard Arm Cortex A53 & Cortex A53 SOC in both air and ground units for custom applications.

Technical specifications HERELink ground control station

Ground & Air Unit:

Feature

Specification

SOC:

ARM Cortex A53 4 core 2.2GHz + Cortex A53 4 core 1.4GHz

Image Processing:

Mali-T860 GPU

SDR:

A7 + DSP

Memory:

Air Unit: LPDDR3: 1GB, Ground Station: LPDDR3: 2GB, EMMC: Air / Ground 4GB

Transmission Distance:

FCC 20km CE / SRRC 12km Image transmission delay: ≤ 110ms Image transmission: 720p@30fps 1080p@30 / 60fps transmission,signal bandwidth 20MHz / 10MHz

Frequency Band:

2.4GHz ISM Receive sensitivity: -99dBm@20MHz BW Interference recovery: < 1s

Ground Station:
Herelink – Ground Station

Feature

Specification

Screen:

5.46 inch 1080P, 16 million colors, capacitive touch screen

Audio:

Built-in speaker × 1, built-in microphone × 2

Remote control:

Hall affect gimbals with removable sticks x 2, scroll wheel × 1, bottom button × 6 with backlight, top button × 1 (right)

Wireless:

Bluetooth / WIFI / GPS / 2.4G map transmission ground

Inputs:

MicroUSB × 1, Micro SD × 1 (supports maximum 64GB)

Antenna:

Circular (5dBi) × 1, detachable, omnidirectional (2dBi) × 1, detachable,built-in wifi antenna, built-in GPS antenna, external GPS antenna interface x 1

Power :

Built-in 4950 mAh Lipo Battery

Charging :

Support micro USB port 5v 2A current charging

Power consumption:

The average power consumption does not exceed 4W (only picture transmission work, medium screen brightness, WiFi off, GPS off)

Size:

217 × 106.5 × 31mm not including external antenna and rocker

Air Unit:

Weight(antenna included)
Herelink 1.1: 98g
Size
78.5×30×15mm
Signal Bandwidth
20MHz / 10MHz
Power Consumption
The average power consumption does not exceed 4W
Micro HDMI 1
Camera video signal input (Recommend)
Micro HDMI 2
Camera video signal input
Power Input
Recommended supply voltage ~7V: minimum 6V, maximum 12V and avoid sharing BEC with servos
UART Interface
3.3V UART
S.bus Interface
Dual RCout ,S.bus1 and S.bus2
Micro USB
Used for debugging and upgrading, support OTG mode**(no need external power for USB device)**
Buttom
Used for pairing and state reset
Indicator light 1 ,2
Used to indicate state for pairing and video transmission
MMCX antenna jack 1,2
Used for signal transmission and ground communication
SD Slot(only supported by Airunit 1.1)
For future usage
ETH Interface(only supported by Airunit 1.1)
Network protocol device access

Reviews

There are no reviews yet.

Be the first to review “Herelink HD Video Transmission System v1.1”

Your email address will not be published.