The Cube Orange+ Standard Set (ADS-B Carrier Board)

419,00

The Cube orange standard set (pixhawk 2.1) is an all in one autopilot and flightcontroller for your drone. The Cube is one of the newest and most advanced flightcontrollers programmable with Ardupilot or PX4. It is capabale of fully autonomous flight. With its triple redundant IMU sensors it can be used for professional drones, UAV’s, rovers or even subs.

 

 

 

Available on backorder

Description

The Cube Orange+ standard set, (pixhawk 2.1) is an all in one autopilot and flightcontroller. The Cube is the newest and most advanced flightcontroller. Programmable with Ardupilot or PX4 it is capabale of fully autonomous flight.
And with its triple redundant IMU sensors, it can be used for professional drones, UAV’s, rovers or even subs.
Additionally with the installed uAvionix ADS-B in receiver you can get information and location about other aircraft nearby. In addition it also supports 360 degrees object avoidance. (with the proper sensors).
The Cube orange standard set is used world wide by professional drone developers and users. Currently it is one of the most advanced Ardupilot flight controller on the market. The Cube is designed by Cubepilot an Australian company that produces only in allied countries. Thus making it a safe and reliable flight controller for the most demanding drones and UAVs.
Also if you need any advice or more information about your drone project. Feel free to contact us!
For more information and how to install the cube autopilot go to:
Main Processor: STM32H757 Dual Core M7
Coprocessor: STM32F100
Supported RC signals: PPM/SBUS/DSM
Power redundancy: Triple redundancy
Sensors: Triple IMU System
Sensors details: IMU1 (Isolated_ ICM 42688
IMU2 (Isolated ICM 20948
IMU3 (Fixed) ICM20649
MS5611 x 2(Baro)
Supported firmware: Ardupilot and PX4 open source flight controller firmware, Hionos DO-178C
Supported vehicle types: Fixed-wing planes
Copters with 3-8 motors
Helicopters
VTOL-planes
Rovers/boats/submarines
Specification
Weight 73g
Chassis Material CNC Aluminum Alloy(cube)+ABS Molding(Carrier Board)
Size cube 38.4×38.4x22mm
Carrier Board 94.5×44.3×17.3mm
Operating temperature -10~+55° IMU with temperature control
PWM I/Os 14
Mavlink serial interface 2
Number of GPS supported 4
Debug interface 2
I2C interface 2
CAN interface 2
Features
Supports multiple modes such as Loitering, Altitude Hold, mode (with Waypoints), following mode, etc
Supports Mission Planner and QGroundControl ground control stations.
Built-in flight logging.
Real-time flight data transmission.
Supports 360-degrees object avoidance.

 

De CUBE orange standard set works perfectly with the Herelink: https://aeroboticshop.com/product/here-link-hd-video/