Mauch PL 4-6S BEC 2x 5.35v 1x 12v output
Mauch premium line BEC 2x 5.35v and 1x 12v output.
The BEC is delivered without flight controller cable! Please choose one of the following cables:
M041: DF13-6p -> Pixhawk 1 / APM… etc.
M042: Molex Clik-Mate 2.0 – 6p -> Pixhawk 2.1
M043: JST-GH-6p -> Pixhawk 3… etc
4 in stock
Mauch PL 4-6S BEC 2x 5.35v and 1x 12v for flight controllers and peripheral hardware.
Input 4-6S LiPo / max. 28V.
Output 2x 5.35V / 3A + 1x 12.0V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2 and output connector with Molex Clik-Mate 4p.
Input wrong polarity protection, as well as TDK input and output capacitors to prevent burn out of the UBEC from voltage spikes.
Blue power “ON’ LED. (3x)
- 32mm x 50mm x 7mm / 19g without CFK enclosure
- 34mm x 52mm x 10mm / 24g with CFK enclosure
Scope of delivery:
- 1x Mauch PL-4-6S BEC 2x
- 1x CFK enclosure
- 1x Sensor cable (040) Molex Clik-Mate 4p / L = 150mm
- 1x Backup cable (050) for Pixhawk 2.1 / Molex Clik-Mate 2.0-6p / L = 150mm
- 1x 12.0V output cable one site Molex Clik-Mate 1.25mm-4p, the othersite open. / L = 150mm
REM: The BEC is delivered without an flight controller cable, so please selct the correct cable to match your FC:
041: DF13-6p -> Pixhawk 1 / APM… etc.
042: Molex Clik-Mate 2.0 – 6p -> Pixhawk 2.1
043: JST-GH-6p -> Pixhawk 3… etc