-
Mauch PL-050 sensor
- €53,90
- Mauch 50A ampere and voltage meter. Instantly usable with the Mauch PL and PC series BEC and X2 sensor hub. The cable is included in the BEC. Usable up until 20S / 85V. Molex connector 4p. Have a look at the support page for more information about how to use the product.
- Add to cart
-
- Out of Stock
Mauch PL-100 sensor
- €53,90
- 100A – Current / Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-100U. Voltage range is up to 20S (85V) with solder bridge open and up to 7S (30V) with solder bridge closed. This Sensor board connects directly to any Premium-Line BEC or Sensor Hub X2-V2.
- Read more
-
-
Mauch PL-200 sensor
- €59,90
- 200A - Current / Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-200U. Voltage range is up to 20S (85V) with solder bridge open and up to 7S (30V) with solder bridge closed. This Sensor board connects directly to any Premium-Line BEC or Sensor Hub X2-V2.
- Add to cart
-
Mauch PL-200 8AWG sensor
- €60,85
- Mauch 200A ampere and voltage meter with 8AWG cable. Instantly usable with the Mauch PL and PC series BEC and X2 sensor hub. The sensor cable is included with the BEC. Usable up until 20S / 85V. Molex connector 4p.
- Add to cart
-
- Out of Stock
Mauch PL 2-6S BEC 1x 5.3V
- €38,90
- The Mauch PL 2-6S BEC 1x 5.3V has a power input of 2-6S LiPo / max. 28V. Output 5.35V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A output current. Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2 and output conector with Molex Clik-Mate 4p. Input wrong polarity…
- Read more
-
-
PL 2-6S BEC 2x 5.35V
- €59,90
- Mauch premium line BEC 2x 5.35v output. The BEC is delivered without flight controller cable! Please choose one of the following cables: M041: DF13-6p -> Pixhawk 1 / APM… etc. M042: Molex Clik-Mate 2.0 – 6p -> Pixhawk 2.1 M043: JST-GH-6p -> Pixhawk 3… etc
- Add to cart
-
Mauch PL 4-6S BEC 2x 5.35v 1x 12v output
- €79,90
- Mauch premium line BEC 2x 5.35v and 1x 12v output. The BEC is delivered without flight controller cable! Please choose one of the following cables: M041: DF13-6p -> Pixhawk 1 / APM… etc. M042: Molex Clik-Mate 2.0 – 6p -> Pixhawk 2.1 M043: JST-GH-6p -> Pixhawk 3… etc
- Add to cart
-
Mauch PL 4-14S HYB BEC 1x 5.35V
- €59,99
- 1. Mauch premium line HYB BEC 1x 5.35v output The BEC is delivered without a flight controller cable! Please choose one of the following cables: M041: DF13-6p -> Pixhawk 1 / APM… etc. M042: Molex Clik-Mate 2.0 – 6p -> Pixhawk 2.1 M043: JST-GH-6p -> Pixhawk 3… etc
- Add to cart
-
Mauch PL 4-14S HYB-BEC 2×5.35v
- €99,99
- Mauch premium line HYB BEC 2x 5.35v output. The BEC is delivered without flight controller cable! Please choose one of the following cables: M041: DF13-6p -> Pixhawk 1 / APM… etc. M042: Molex Clik-Mate 2.0 – 6p -> Pixhawk 2.1 M043: JST-GH-6p -> Pixhawk 3… etc
- Add to cart
-
Mauch PL 4-14S HYB BEC 2×5.3V 1x5V 1x12V
- €189,90
- Mauch premium line HYB BEC 2x 5.35v, 1x 5v en 1x 12v output. the UBEC is delivered without a flight controller cable. chose one of the following: M041: DF13-6p -> Pixhawk 1 / APM… etc. M042: Molex Clik-Mate 2.0 – 6p -> Pixhawk 2.1 M043: JST-GH-6p -> Pixhawk 3… etc
- Add to cart
-
- Out of Stock
Mauch 2x 200A PDB with 400A main switch
- €399,90
- Mauch 2x 200A PDB with 400A main switch power distribution board for Pixhawk 2.1 (The Cube) and any other flight controller via adapter cable. With integrated 2x200A hall sensor, Sensor Hub X2, 4-14S HYB-BEC and most important an main power switch with an continues current of 400A.
- Read more
-
-
Mauch Power Cube 1 v3
- €134,90
- Mauch Power Cube 1, 3th generation. 1x 5.35v output 10A . Improve your drone with an advanced UBEC. Specially designed for the Cube autopilot but also compatible with other flight controllers. Provides the drone or UAV with a safe power supply.
- Add to cart
-
- Out of Stock
Mauch Power Cube 2 v3
- €179,90
- Mauch Power Cube 2, 3th generation. 2x 5.35v output 10A Improve your drone with an advanced UBEC. Specially designed fot the Cube autopilot but also compattible with other flight controllers. Provides the drone or UAV flight controller with a safe power supply.
- Read more
-
-
Mauch Power Cube 3 v3
- €249,90
- Mauch Power Cube 3, 3th generation. 2x 5.35v output 10A + 1x 12v 10A. Improve your drone with an advanced UBEC. Specially designed for the Cube autopilot but also compatible with other flight controllers. Provides the drone, UAV or peripherals with a safe power supply.
- Add to cart
-
- Out of Stock
Mauch Power Cube 4 v3
- €299,90
- Mauch Power Cube 4, 3th generation. 3x 5.35v output 10A + 1x 12v 10A. Improve your drone with an advanced UBEC. Specially designed for the Cube autopilot but also compatible with other flight controllers. Provides the drone, UAV or peripherals with a safe power supply.
- Read more
-
-
- Out of Stock
Sensor hub X8 Mauch
- €169,00
- Read more
-
-
- Out of Stock
Mauch PL-X2 sensor hub
- €61,90
- X2 sensor hub. 2 PL sensors can be connected to this hub for use with 2 batteries. Ampere and voltage is send to the flight controller/autopilot.
- Read more
-
-
TAROT X8 – II Octo-Copter Kit TL8X000 – PRO
- €399,00
- TAROT X8 is designed for professional Aerial Photography. Includes electronic retractable landing gear, foldable arms and integrated PCB.
- Add to cart
-
Herelink HD Video Transmission System v1.1
- €1.089,00
- The Herelink HD video transmission system is an all in one ground control station, data telemetry and remote controller. Up to 12 km range and 1080HD video. Designed for Ardupilot, PX4 and the Cube autopilots. also compatible with other flight controllers.
- Add to cart
-
Here 3+ RTK GNSS/GPS combo
- €349,00
- The here 3 RTK GNSS/GPS set is a combo set. It has the Here 3 and Here+ RTK base included. Highlights Centimeter‑level GNSS positioning for the mass market Integrated Real Time Kinematics (RTK) for fast time‑to‑market Smallest, lightest, and energy‑efficient RTK module Complete and versatile solution due to base and rover variants
- Add to cart
-
Here 3+ GPS with iStand
- €219,00
- The Here 3+ GPS is a high precision GNSS system that supports RTK mode, built with CAN protocol. It is also designed to be dust-proof and splash-proof up to a certain limit.
- Add to cart
-
Here+ V2 RTK GNSS combo
- €350,00
- De HERE+ v2 RTK GNSS combo is capable of centimeter level precision. It is the perfect solution for mapping and survey drones. Or other drones that require a precise navigation performance. 2 seperate products: HX4-06058 Here+ V2 Rover (M8P) HX4-06019 Here+ RTK Base (M8P) What is inside: Here+V2 RTK Rover * 1 Here+V2 RTK Rover Connecting Cable(Serial+I2C) * 1 Here+V2 RTK Rover Connecting Cable(CAN) * 1 UART-USB Converter…
- Add to cart
-
Herelink Air unit
- €649,00
- The Herelink air unit HD video transmission system is an all in one ground control station, data telemetry and remote controller. Up to 12 km range and 1080HD video. Designed for Ardupilot, PX4 and the Cube autopilots. also compatible with other flight controllers.
- Add to cart
-
Herelink ground unit v1.1
- €649,00
- The Herelink HD video transmission system is an all in one ground control station, data telemetry and remote controller. Up to 12 km range and 1080HD video. Designed for Ardupilot, PX4 and the Cube autopilots. also compatible with other flight controllers.
- Add to cart
-
- Out of Stock
Hexsoon EDU450 quadcopter frame
- €241,00
- The Hexsoon EDU450 is a drone frame specially designed for the Cube autopilot but also compatible with other flightcontrollers. The drone frame is perfect for development, testing or just hobby usage. The set is complete with all the hardware needed to complete the frame; wires, power distribution etc.
- Read more
-
-
Mauch M041 FC cable for pixhawk 1 / apm (df-13 6 pin)
- €4,99
- Mauch M041 FC cable for pixhawk 1 / apm (df-13 6 pin)
- Add to cart
-
Mauch M042 FC cable for pixhawk 2.1 the CUBE
- €4,99
- Mauch M042 FC cable for pixhawk 2.1 the CUBE.
- Add to cart
-
Mauch M043 FC cable for pixhawk 3
- €4,99
- Mauch M043 FC cable for pixhawk 3
- Add to cart
-
Mauch PL sensor cable molex clickmate
- €3,99
- PL and PC series sensor cable. Compatible with the PL series BEC and PL-xxx sensors or the X2 sensor hub. This cable is included in the BEC or X2 sensor hub.
- Add to cart
-
The Cube Purple
- €239,00
- The Cube purple autopilot is the smallest cube flightcontroller yet. Instead of a triple redundant sensor it has a single IMU and baro sensor. It is perfect for the less demanding drone builds.
- Add to cart
-
The CUBE Purple set
- €379,00
- The CUBE purple set is a basic model autopilot and flightcontroller for smaller drones, rovers and airplanes. Despite its size, this drone controller has got almost the same abilities as his bigger brother The CUBE orange.
- Add to cart
-
- Out of Stock
CAN BUS splitter
- €15,00
- CAN BUS splitter. Included in the CUBE orange ADS-B set.
- Read more
-
-
- Out of Stock
Amass AS150 connector set
- €9,90
- Amass AS150 connectors. 7mm bullet gold plated connectors capable of 200A currents (150A constant current).
- Read more
-