Mauch PL 2-6S BEC 1x 5.3V
€38,90
The Mauch PL 2-6S BEC 1x 5.3V has a power input of 2-6S LiPo / max. 28V.
Output 5.35V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2 and output conector with Molex Clik-Mate 4p.
Input wrong polarity protection, as well as TDK input and output capacitors to prevent burn out of the UBEC from voltage spikes.
Out of stock
Description
The Mauch PL 2-6S BEC 1x 5.3V has a power input of 2-6S LiPo / max. 28V. Mauch BECs are preferred power modules for drone builds.
Output 5.35V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A output current.
Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2 and output conector with Molex Clik-Mate 4p.
Input wrong polarity protection, as well as TDK input and output capacitors to prevent burn out of the UBEC from voltage spikes.
Blue power “ON’ LED.
34mm x 22mm x 7mm / 7g without CFK enclosure
36mm x 24mm x 10mm / 12g with CFK enclosure
Scope of delivery:
- 1x Mauch PL 2-6S BEC 1x 5.3V
- 1x CFK enclosure
- 1x Sensor cable Molex Clik-Mate 4p / L = 150mm
REM: The BEC is delivered without an flight controller cable, so please selct the correct cable to match your FC:
M041: DF13-6p -> Pixhawk 1 / APM… etc.
M042: Molex Clik-Mate 2.0 – 6p -> Pixhawk 2.1
M043: JST-GH-6p -> Pixhawk 3… etc
Visit: Ardupilot for the installation manual or more information. If you need any advise on your drone build and/or power selection, please feel free to send us an email.
Reviews
There are no reviews yet.