Mauch 2x 200A PDB with 400A main switch power distribution board for Pixhawk 2.1 (The Cube) and any other flight controller via adapter cable. With integrated 2x200A hall sensor, Sensor Hub X2, 4-14S HYB-BEC and most important an main power switch with an continues current of 400A.
The Mauch PL 2-6S BEC 1x 5.3V has a power input of 2-6S LiPo / max. 28V. Output 5.35V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A output current. Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2 and output conector with Molex Clik-Mate 4p. Input wrong polarity…
Mauch premium line HYB BEC 1x 5.35v output. De BEC wordt geleverd zonder flight controller kabel! Kies een van de volgende kabels: M041: DF13-6p -> Pixhawk 1 / APM… etc. M042: Molex Clik-Mate 2.0 – 6p -> Pixhawk 2.1 M043: JST-GH-6p -> Pixhawk 3… etc
Mauch premium line HYB BEC 2x 5.35v, 1x 5v en 1x 12v output. the UBEC is delivered without a flight controller cable. chose one of the following: M041: DF13-6p -> Pixhawk 1 / APM… etc. M042: Molex Clik-Mate 2.0 – 6p -> Pixhawk 2.1 M043: JST-GH-6p -> Pixhawk 3… etc
Mauch premium line HYB BEC 2x 5.35v output. De BEC wordt geleverd zonder flight controller kabel! Kies een van de volgende kabels: M041: DF13-6p -> Pixhawk 1 / APM… etc. M042: Molex Clik-Mate 2.0 – 6p -> Pixhawk 2.1 M043: JST-GH-6p -> Pixhawk 3… etc
Mauch premium line BEC 2x 5.35v en 1x 12v output. De BEC wordt geleverd zonder flight controller kabel! Kies een van de volgende kabels: M041: DF13-6p -> Pixhawk 1 / APM… etc. M042: Molex Clik-Mate 2.0 – 6p -> Pixhawk 2.1 M043: JST-GH-6p -> Pixhawk 3… etc
PL en PC series sensor kabel. Te gebruiken tussen de PL series BEC en PL-xxx sensoren of X2 sensor hub. Deze kabel zit standaard bij de BEC of X2 sensor hub geleverd.
Mauch 50A ampère en voltage meter. Direct te gebruiken met de Mauch PL en PC series BEC en X2 sensor hub. De sensor kabel zit bij de BEC inbegrepen. Te gebruiken tot en met 20S / 85V. Molex connector 4p. Kijk bij de support pagina voor meer informatie over het gebruik.
100A – Current / Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-100U. Voltage range is up to 20S (85V) with solder bridge open and up to 7S (30V) with solder bridge closed. This Sensor board connects directly to any Premium-Line BEC or Sensor Hub X2-V2.