Airbot systems mini carrier board PDB combo
€179,00
The Airbot Systems Mini carrier board is one of the way to install a Cube on a drone. The Mini carrier board encapsulate all the wiring in a 50.5×57.5mm board, in order to save space and weight for applications which have size limits.
3 in stock
Description
GENERAL :
The Airbot Systems Mini carrier board PDB combo is one of the way to install a Cube on a drone. The Mini carrier board encapsulate all the wiring in a 50.5×57.5mm board, in order to save space and weight for applications which have size limits.
The Airbot Systems Power Distribution Board Set can be installed directly under Airbot Mini carrier board set.
The PDB allows up to 180A through ESC interface and four pairs of low power pads (2 on top/ 2 on bottom).
The mounting hole are aligned with Airbot carrier board, so the board can be stacked together while separated by small nylon spacers.
Airbot systems mini carrier board PDB combo FEATURES :
- Dual power inputs (redundant power with automatic switch to the second power source when first one fails)
- Easy to install on drone (see the mounting pattern above)
- Power distribution & voltage protection (providing current to each connector)
- Motor PWM signal distribution (up to 8 motors – distributed on corners)
- Standard 2.54mm servo PPM/S.BUS/Spectrum RC input (+5v/+3.3v selectable power from carrier board)
- AUX VCC pins are connected together. This allows powering the AUX rail externally.
For more information, please visit:
Reviews
There are no reviews yet.