mini carrier board, PDB and Cube orange+ combo
€435,00
The Airbot Systems Mini carrier board is one of the way to install a Cube on a drone. The Mini carrier board encapsulate all the wiring in a 50.5×57.5mm board, in order to save space and weight for applications which have size limits.
3 in stock
Description
Airbot Cube+ GENERAL :
Airbot Cube+ and PDB combo
- Dual power inputs (redundant power with automatic switch to the second power source when first one fails)
- Easy to install on drone (see the mounting pattern above)
- Power distribution & voltage protection (providing current to each connector)
- Motor PWM signal distribution (up to 8 motors – distributed on corners)
- Standard 2.54mm servo PPM/S.BUS/Spectrum RC input (+5v/+3.3v selectable power from carrier board)
- AUX VCC pins are connected together. This allows powering the AUX rail externally.
Vibration Damped IMU board version 2 (Fitted to Cube Orange autopilot, Cube BlueH7 and Cube Yellow)
-
ICM20602
-
ICM 20948
-
MS5611 Barometer
-
All sensors connected via SPI.
I/O ports
-
14 PWM servo outputs (8 from IO, 6 from FMU).
-
R/C inputs for CPPM, Spektrum / DSM and S.Bus.
-
Analogue / PWM RSSI input.
-
S.Bus servo output.
-
5 general purpose serial ports, 2 with full flow control
-
Two I2C ports
-
One SPI port (un-buffered, for short cables only not recommended for use).
-
Two CAN Bus interface. (CAN FD for BlueH7 and Orange with CubePilot Logo)
-
3 Analogue inputs
-
High-powered piezo buzzer driver. (On expansion board)
-
High-power RGB LED. (I2C driver compatible Connected externally only)
-
Safety switch / LED.
Reviews
There are no reviews yet.