Mauch 50A ampere and voltage meter. Instantly usable with the Mauch PL and PC series BEC and X2 sensor hub. The cable is included in the BEC. Usable up until 20S / 85V. Molex connector 4p. Have a look at the support page for more information about how to use the product.
100A – Current / Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-100U. Voltage range is up to 20S (85V) with solder bridge open and up to 7S (30V) with solder bridge closed. This Sensor board connects directly to any Premium-Line BEC or Sensor Hub X2-V2.
200A - Current / Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-200U. Voltage range is up to 20S (85V) with solder bridge open and up to 7S (30V) with solder bridge closed. This Sensor board connects directly to any Premium-Line BEC or Sensor Hub X2-V2.
Mauch 200A ampere and voltage meter with 8AWG cable. Instantly usable with the Mauch PL and PC series BEC and X2 sensor hub. The sensor cable is included with the BEC. Usable up until 20S / 85V. Molex connector 4p.
The Mauch PL 2-6S BEC 1x 5.3V has a power input of 2-6S LiPo / max. 28V. Output 5.35V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A output current. Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2 and output conector with Molex Clik-Mate 4p. Input wrong polarity…
Mauch premium line BEC 2x 5.35v output. The BEC is delivered without flight controller cable! Please choose one of the following cables: M041: DF13-6p -> Pixhawk 1 / APM… etc. M042: Molex Clik-Mate 2.0 – 6p -> Pixhawk 2.1 M043: JST-GH-6p -> Pixhawk 3… etc
Mauch premium line BEC 2x 5.35v and 1x 12v output. The BEC is delivered without flight controller cable! Please choose one of the following cables: M041: DF13-6p -> Pixhawk 1 / APM… etc. M042: Molex Clik-Mate 2.0 – 6p -> Pixhawk 2.1 M043: JST-GH-6p -> Pixhawk 3… etc
1. Mauch premium line HYB BEC 1x 5.35v output The BEC is delivered without a flight controller cable! Please choose one of the following cables: M041: DF13-6p -> Pixhawk 1 / APM… etc. M042: Molex Clik-Mate 2.0 – 6p -> Pixhawk 2.1 M043: JST-GH-6p -> Pixhawk 3… etc
Mauch premium line HYB BEC 2x 5.35v, 1x 5v en 1x 12v output. the UBEC is delivered without a flight controller cable. chose one of the following: M041: DF13-6p -> Pixhawk 1 / APM… etc. M042: Molex Clik-Mate 2.0 – 6p -> Pixhawk 2.1 M043: JST-GH-6p -> Pixhawk 3… etc
Mauch 2x 200A PDB with 400A main switch power distribution board for Pixhawk 2.1 (The Cube) and any other flight controller via adapter cable. With integrated 2x200A hall sensor, Sensor Hub X2, 4-14S HYB-BEC and most important an main power switch with an continues current of 400A.
Mauch Power Cube 1, 3th generation. 1x 5.35v output 10A . Improve your drone with an advanced UBEC. Specially designed for the Cube autopilot but also compatible with other flight controllers. Provides the drone or UAV with a safe power supply.
Mauch Power Cube 2, 3th generation. 2x 5.35v output 10A Improve your drone with an advanced UBEC. Specially designed fot the Cube autopilot but also compattible with other flight controllers. Provides the drone or UAV flight controller with a safe power supply.
Mauch Power Cube 3, 3th generation. 2x 5.35v output 10A + 1x 12v 10A. Improve your drone with an advanced UBEC. Specially designed for the Cube autopilot but also compatible with other flight controllers. Provides the drone, UAV or peripherals with a safe power supply.
Mauch Power Cube 4, 3th generation. 3x 5.35v output 10A + 1x 12v 10A. Improve your drone with an advanced UBEC. Specially designed for the Cube autopilot but also compatible with other flight controllers. Provides the drone, UAV or peripherals with a safe power supply.
PL and PC series sensor cable. Compatible with the PL series BEC and PL-xxx sensors or the X2 sensor hub. This cable is included in the BEC or X2 sensor hub.