Skip to product information
1 of 3

Mauch Power cube v3

Mauch Power cube v3

SKU:M051

Regular price €139,00 EUR
Regular price Sale price €139,00 EUR
Sale Sold out
Taxes included. Shipping calculated at checkout.

Low stock: 2 left

Need more?

This product is available on backorder. Please note that the shipping time can take up to 2 weeks. Items in stock will be shipped directly.

Just add the amount you need and click on "Add to cart".

Version

The MAUCH PC or power cube series, is an advanced BEC for powering the flight controller and peripheral hardware. every BEC alows for a wide Vin up to 14s lipo's. The power cubes allow for larger sensors, payloads etc. to be installed with reliable power.

The outputs are standard 5.3v or 12v up to 10A. Custom outputs are possible on request.

Use of a power switch is possible (M059) please order separately.

V3 upgrades

  • Each output includes independent under-voltage protection (13.5V)
  • Over voltage feedback loop for all outputs.
  • Oversized FET in input stage. -> Nearly spark free connection.
  • Soft start (20ms) to ensure proper power up from GND.
  • Can be used without anti-spark plugs.
  • Now compatible with bench top power supplies units.
  • Arming of FET via switch or PWM (receiver or RFD900x and optional PWM module). If no external switch is installed (and no PWM), then the FET will arm itself after 2sec. and the Power-Cube switches on.
  • Dual (redundant) 100V linear voltage regulators for FET driver and digital circuit.
  • If digital part fails, then Power-Cube will arm itself within 3 sec. -> This emergency power on circuit is running in parallel to the main control and is fully independent.
  • Once armed, it can be only disarmed with positive signal from switch and/or an PWM above 1500us. -> This prevents accidentally power off in case of an wire break or PWM signal loss.

Custom outputs available

Power Cube 1 v3

  • 1x 5.3v
  • 1x sensor cable
  • 1x Enclosure
  • 1x cable for Cube orange standard set

Power Cube 2 v3

  • 2x 5.3v
  • 1x sensor cable
  • 1x Enclosure
  • 1x cable for Cube orange standard set
  • 1x back up cable

Power Cube 3 v3

  • 2x 5.3v 1x 12v
  • 1x sensor cable
  • 1x Enclosure
  • 1x cable for Cube orange standard set
  • 1x back up cable
  • 1x 12v cable

Power Cube 4 v3

  • 3x 5.3v 1x 12v
  • 1x sensor cable
  • 1x Enclosure
  • 1x cable for Cube orange standard set
  • 1x back up cable
  • 1x 12v cable
  • 1x 5.3v cable
View full details