The Cube ID CAN is a remote ID for drones and UAS'. The module broadcasts information; type of aircraft, identification number, position, altitude etc.
HERE FLOW drone optical flow sensor and LIDAR module. Is an advanced and ultra small module specialy designed for Ardupilot/PX4. Uses CAN protocol to communicate with your flight controller. For more information: https://docs.cubepilot.org/user-guides/flow-senor/here-flow
Mauch 50A ampere and voltage meter. Instantly usable with the Mauch PL and PC series BEC and X2 sensor hub. The cable is included in the BEC. Usable up until 20S / 85V. Molex connector 4p. Have a look at the support page for more information about how to use the product.
100A – Current / Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-100U. Voltage range is up to 20S (85V) with solder bridge open and up to 7S (30V) with solder bridge closed. This Sensor board connects directly to any Premium-Line BEC or Sensor Hub X2-V2.
200A - Current / Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-200U. Voltage range is up to 20S (85V) with solder bridge open and up to 7S (30V) with solder bridge closed. This Sensor board connects directly to any Premium-Line BEC or Sensor Hub X2-V2.
Mauch 200A ampere and voltage meter with 8AWG cable. Instantly usable with the Mauch PL and PC series BEC and X2 sensor hub. The sensor cable is included with the BEC. Usable up until 20S / 85V. Molex connector 4p.
The Mauch PL 2-6S BEC 1x 5.3V has a power input of 2-6S LiPo / max. 28V. Output 5.35V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A output current. Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2 and output conector with Molex Clik-Mate 4p. Input wrong polarity…
Mauch premium line BEC 2x 5.35v output. The BEC is delivered without flight controller cable! Please choose one of the following cables: M041: DF13-6p -> Pixhawk 1 / APM… etc. M042: Molex Clik-Mate 2.0 – 6p -> Pixhawk 2.1 M043: JST-GH-6p -> Pixhawk 3… etc
Mauch premium line BEC 2x 5.35v and 1x 12v output. The BEC is delivered without flight controller cable! Please choose one of the following cables: M041: DF13-6p -> Pixhawk 1 / APM… etc. M042: Molex Clik-Mate 2.0 – 6p -> Pixhawk 2.1 M043: JST-GH-6p -> Pixhawk 3… etc
1. Mauch premium line HYB BEC 1x 5.35v output The BEC is delivered without a flight controller cable! Please choose one of the following cables: M041: DF13-6p -> Pixhawk 1 / APM… etc. M042: Molex Clik-Mate 2.0 – 6p -> Pixhawk 2.1 M043: JST-GH-6p -> Pixhawk 3… etc
Mauch premium line HYB BEC 2x 5.35v, 1x 5v en 1x 12v output. the UBEC is delivered without a flight controller cable. chose one of the following: M041: DF13-6p -> Pixhawk 1 / APM… etc. M042: Molex Clik-Mate 2.0 – 6p -> Pixhawk 2.1 M043: JST-GH-6p -> Pixhawk 3… etc