Mini Carrier Board
€99,00
The Cube mini carrier board is a small but versatile carrier board for your Cube autopilot and flight controller.
4 in stock
Description
The Cube Mini Carrier Board designed as a small load board, can be used in small and relatively small space UAV, unmanned vehicle, unmanned ship and other models. Build your drone smaller, better and easier. We recommend using a Mauch BEC and sensor to power the carrier board.
For more information on the carrier board go to: Mini carrier board
The Cube autopilot is sold separatly !
Use the Cube orange or cube purple for this carrier board.
Working Conditions and Performance for the Cube mini carrier board
About |
Description |
POWER input voltage / rated input current |
4-5.7V / 2.5A; 0-20V is safe for the system but it will not work |
POWER rated output / input power |
14 W |
USB port input voltage / rated input current |
4-5.7V / 250mA |
Servo rail input voltage |
4-10.5V |
Waterproof |
Not waterproof. External waterproof protection is needed |
Working temperature |
-10°C / 55°C |
Size | 47.5×38.5×17.8 (mm) |
Weight | 15g |
TELEM1(SERIAL1,UART1) | √ |
TELEM2(SERIAL2,UART2) | √ |
GPS1(SERIAL3,UART3) | √ |
GPS2(SERIAL4,UART4) | √ |
Buzzer Interface | √ |
POWER1 | √ |
POWER2 | √ |
SPKT | √ |
CAN2 | √ |
CAN1 | |
I2C 2 | √ |
I2C 1 | |
ADC | |
USB | |
S.BUS | √ |
PPM | √ |
SPI | |
CONS SBUSo | |
Debug(FMU) | √ |
Debug(IO) | |
BATT2 Sense | √ |
VBATT 3A | |
VPLD 12V 2A | |
5V 1.5A | |
MAIN OUT 1-8 | √ |
AUX OUT 1-6 | √ |
BEC 5V | |
BEC 12V | |
Power Module |
Reviews
There are no reviews yet.