Mauch PL-200 sensor

59,90

200A – Current / Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-200U. Voltage range is up to 20S (85V) with solder bridge open and up to 7S (30V) with solder bridge closed. This Sensor board connects directly to any Premium-Line BEC or Sensor Hub X2-V2.

1 in stock

SKU: M003 Categories: , Tags: , , , ,

Description

Mauch PL-200 voltage and current sensor. 200A – Current / Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-200U. Voltage range is up to 20S (85V) with solder bridge open and up to 7S (30V) with solder bridge closed. Please check the maual page for more details. This Sensor board connects directly to any Premium-Line BEC or Sensor Hub X2-V2.

Connected to the sensor are 2x15cm AWG10 wire (red) as a standard.REM: The connector is Molex / Clik-Mate / 1.25mm / 4p (5023800400)Without CFK enclosure = 27.5 x 19.5 x 10.5mm / 39g (with 2x 15cm 8AWG)With CFK enclosure = 43.5 x 23.0 x 15mm / 44g (with 2x 15cm 8AWG). Delivery in PP box: 88 x 60 x 20mm / 59g Delivery without sensor cable (comes with the BEC’s), with CFK enclosure.

REM: If you want to use your own BEC, then please order a sensor cable (040) and ensure that the supplied voltage is within 4.95-5.05V. The Mauch PL-200 sensor board is only installed into the “positive” (red) main wire from the LiPo, the “negative “black” wire stays untouched, which reduces the risk of short circuits on the sensor board.

The voltage measurement, has an installed filter which reduces the risk of false RTL trigger, which might be happened if we fly in very windy conditions due to sudden motor speed up to keep the flight leveled.http://ardupilot.org/copter/docs/common-mauch-power-modules.html for more information and how to install the sensor.

 

Reviews

There are no reviews yet.

Be the first to review “Mauch PL-200 sensor”

Your email address will not be published. Required fields are marked *