Mauch PL 2-6S BEC 1x 5.3V

38,90

The Mauch PL 2-6S BEC 1x 5.3V has a power input of 2-6S LiPo / max. 28V.

Output 5.35V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A output current.

Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2 and output conector with Molex Clik-Mate 4p.

Input wrong polarity protection, as well as TDK input and output capacitors to prevent burn out of the UBEC from voltage spikes.

Out of stock

SKU: M015 Categories: , Tags: , , , ,

Description

The Mauch PL 2-6S BEC 1x 5.3V has a power input of 2-6S LiPo / max. 28V. Mauch BECs are preferred power modules for drone builds.

Output 5.35V / 3A -> +/- 0.05V –> Ripple 10mV (0.2%) at 1.5A output current.

Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2 and output conector with Molex Clik-Mate 4p.

Input wrong polarity protection, as well as TDK input and output capacitors to prevent burn out of the UBEC from voltage spikes.

Blue power “ON’ LED.

34mm x 22mm x 7mm / 7g without CFK enclosure
36mm x 24mm x 10mm / 12g with CFK enclosure

Scope of delivery:

  • 1x Mauch PL 2-6S BEC 1x 5.3V
  • 1x CFK enclosure
  • 1x Sensor cable Molex Clik-Mate 4p / L = 150mm

REM: The BEC is delivered without an flight controller cable, so please selct the correct cable to match your FC:
M041: DF13-6p -> Pixhawk 1 / APM… etc.
M042: Molex Clik-Mate 2.0 – 6p -> Pixhawk 2.1
M043: JST-GH-6p -> Pixhawk 3… etc

Visit: Ardupilot for the installation manual or more information. If you need any advise on your drone build and/or power selection, please feel free to send us an email.

Reviews

There are no reviews yet.

Be the first to review “Mauch PL 2-6S BEC 1x 5.3V”

Your email address will not be published. Required fields are marked *